Pay attention to the details of sports wood floor installation:
1. The assembly is too loose or too tight: the wooden floor expands, shrinks with ambient humidity, and changes in temperature. Therefore, the assembly tightness of the wooden floor should be reasonably arranged according to the environmental humidity of the place of use. If it is too tight, the floor will arch when it expands, and if it is too loose, there will be a large gap when the floor contracts.
2. Moisture-proof treatment of keel: At present, non-dry keel sawn from pine boards is generally used in construction, and it is fixed on the ground about 30 days in advance, and no moisture-proof layer is laid between the keel and the ground. When laying the floor, lay it directly without checking the water content of the keel. At this time, the moisture content of the keel is generally about 25%, and the moisture content of the qualified wooden floor is generally about 12%. If the humidity difference is too large, it will speed up the moisture absorption of the wood floor, causing the floor to arch and the paint to burst.
Sports wood floor technical team
3. Cross-construction of decoration works: During construction, the wooden floor is usually laid first, and then other construction works are carried out on the floor surface. In this way, after the floor is laid, polishing and painting can take a month or more. During this period, if the chemicals in the floor and the surrounding environment. Due to the rapid changes in water content, the moisture is not isolated, it is likely to cause the wooden floor to deform and crack.
4. The keel is fixed with nails: fixed with wooden wedges and nails during construction. The contact surface between the wooden wedge and the nail is too small, and the nail holding force is insufficient, which will easily cause the wooden keel to loosen. There is a noise when stepping on the floor.
