Sports wood flooring is a special construction material that is laid on indoor sports venues and theater stages. Sports wood floors are an integral movement system. The installation of sports wood floors is different from ordinary wood floors, and has its own professional installation process. The sports wood floor engineer will introduce the basic paving process of the sports wood floor:
1. Environmental inspection pavement.
Before the official installation of the sports wooden floor, the paving ground of the sports field should be checked, such as the leveling and waterproofing works of the paving ground of the sports field, which do not meet the installation requirements;
Sports wood floor structure
2. Installation of moisture-proof film.
Select moisture-proof and non-toxic film, lay a moisture-proof isolation layer along the direction of the keel, and the surface of the coil should not have holes, eyes, or tears, otherwise it needs to be repaired, moisture-proof and sound-absorbing, and the floor performance is greatly improved;
3. Install shock-absorbing elastic pads.
The ground is leveled, divided, cemented, leveled, and laid with rubber pads after cleaning the site.
4. Install the keel layer.
Sports wooden floor keel layer, single keel, upper and lower keels, main and auxiliary keels, plate keels, etc. Single keel and upper and lower keels are the basic design structures. On the keel. When installing the lower keel, pay attention to the position of the keel end keel and the rubber dunnage. The position of the wall and the adjacent keel, the upper and lower keels and the wall should have a certain gap to meet the requirements;
5. Install the fur floor.
Sports wooden floor fur floor is also called sandwich board. The laying angle of the sandwich board conforms to the design requirements of the drawing. The edges are cut neatly and the ends are flat with the upper keel.
6. Install the panel.
Check the quality of the panels before installing and laying the panels, skirtings, and ventilation openings of the sports wood floor; after the panels are installed, paint the panels and draw lines according to the design requirements of the sports venues.
The above is the basic paving process of sports wood floor. It is recommended to choose the installer of professional sports wood floor manufacturer to operate, strictly follow the scientific installation and construction technology, and ensure the installation quality of sports wood floor.
