Nebfloor sports wood floor engineers provide popular science for everyone, common purchasing skills and knowledge of sports wood floors:
1. Tree species
There are many tree species available for solid wood sports wood flooring, the precious ones are rosewood, teak; the common ones are maple, oak, ash, gamba; the cheap ones are fir, pine, etc., the price is very different big. When purchasing, choose a natural board as much as possible, do not choose a dyed board, and try to choose a tree species with stable material properties to prevent the appearance of scooping, twisting, bending, cracking, arching, and noise during the long-term use of the wooden floor.
2. Scale
The standard size of the solid wood sports floor currently available in the shopping mall is long and wide, such as 900mm×90mm×18mm. In fact, the wooden floor should be short rather than long, narrow rather than wide, and should be smaller than 600mm×75mm×18mm. Floor, the smaller the scale, the stronger the resistance to deformation. If it is used for floor heating, it should be thin and not thick, usually 8-12mm thick.
3. Moisture content
The moisture content of wood floors is critical. The moisture content of the purchased floor must be the same as the local equilibrium moisture content. If you buy a floor, you must measure the moisture content. If you don't have a moisture content meter, don't buy its board. The method for determining the equilibrium moisture content is very simple. First, measure the moisture content of the purchased type in the exhibition hall, and then open the box to test the moisture content of the purchased type of wood floor. If the difference in moisture content between the two is only +1% to 2%, it is classified as a qualified product.
Sports Wood Flooring Team
4. Machining accuracy
Use 10 pieces of floor to assemble on the flat ground, touch and see by hand, whether the machining quality accuracy, brightness can be flat, lubricated, whether the tenon and groove cooperation, installation gap, anti-deformation groove and other assembly can be tightly seamed.
5. Substrate quality
Check the floor level to see if there are board defects such as bug eyes, cracks, pedantic, blue-stained, dead knots, etc. Regarding the small joints and color difference, it is not too demanding. This is the natural characteristic of wood. As for the natural grain of wood, most of them are chord sections, and a few are radial sections. , unless it is a sliced veneer veneer.
6. Paint quality
Whether it is a lacquered or roller painted floor, commonly known as a lacquered board; whether it is a bright or matt lacquered floor, the selection should be based on whether the paint mold on the surface of the lacquered board is uniform, full, bright without paint leakage, bubbling, For the holes, the wear resistance should be put forward. It is recommended to buy UV light-curing coatings. Market dealers are referred to as UV paint boards. Its wear resistance and scalding resistance are superior to other finishing processes. Burn with a cigarette butt for 20 seconds without leaving a mark.
