How to install sports wooden floor?
In sports venues and theater stage construction projects, its ground paving Engineering is an important part. Sports wood flooring is divided into three and seven layers. Nbfloor sports wood flooring engineers will popularize scientific sports wood flooring installation methods for you:
1.Installation preparation
Before installing and laying the sports wooden floor, the ground should be smoothed. If the ground is bumpy, it will be very difficult to lay the floor. In addition, the wooden floor is made of solid wood and is afraid of moisture. , so the humidity of the concrete floor is greater than3-4%It should be ventilated and dry;
2.Installation Notes
When working on sports wooden floors, wear soft-soled shoes to prevent scratches on the surface; install sports wooden floors at the same time to prevent cross construction.
Sports Wood Flooring Technical Team3.Antalimation
Sports wood floor underlay, keel Anti-corrosion treatment, the keel of the subfloor is colorless anti-corrosion treatment during the production process, and there is no need to apply fire-resistant anti-corrosion coating;
4.Installation layout
Sports wood flooring installation layout.Positioning.When laying out the wire, wood popped up on the ground The center line of the keel position;
5.Elastic gasket
When installing the keel, pay attention to the elastic pad To install well, the elastic pad position spacing400mm;
6.Keel paving.
Keel When paving, attention should be paid to leaving 20-30mm< /span>Gap for ventilation,Disperse moisture,There should be at least 20mm, and then cover it with skirting boards; when laying the floor surface, the gap should be tight, The connector positions should be staggered;
Laying After installing the wooden floor, it is necessary to strengthen the protection of the finished product. Other construction units should pay attention to the protection of the wooden floor during cross construction. If conditions allow, send special personnel to guard it.
