Solid Wood | Sports | Maintenance Tips for Sports Wood Flooring

Solid Wood | Sports | Maintenance Tips for Sports Wood Flooring

Nebok Sports. What are the maintenance tips for sports solid wood floors?

nbfloor

1. Sports solid wood floor The painted wood floor after laying should minimize direct sunlight, so as to prevent the paint from being exposed to too much external rays, which will dry, crack and age in advance. The furniture placed on the floor should be padded with rubber or other soft materials to prevent scratching the floor paint

2. Keep the sports wooden floor dry and clean, and avoid mopping the floor with a wet mop or scrubbing with alkaline water or soapy water, so as not to destroy the brightness of the paint and damage the paint film. To clean the wooden floor, you can use a dry mop into a wrung wet mop, and use floor wax or wood floor maintenance oil to maintain the floor every one to two months.

3. Maintain the balance of indoor air humidity. The indoor air should be kept between 40% and 80%. When it is lower than 40%, humidification measures should be taken. When the air humidity is higher than 80%, it should be dehumidified.

4. In case of heating or other water leakage on the ground, it must be wiped clean in time, and cannot be directly exposed to the sun or baked in an electric oven, so as to avoid drying too fast and cracking of the sports wooden floor.

Sports wood floor structure

5. Any stains on the surface of the sports solid wood floor should be removed in time. If there are oil stains, you can use a rag or mop dipped in warm water or a small amount of washing powder to wipe. If the stains are serious, you can use high-quality sandpaper or steel wool. Swipe try

6. The painted sports solid wood floor will not last for a long time. Do not cover it with plastic sheets or newspapers, otherwise the paint film will become sticky and lose its luster over time. Do not place hot water basins, hot rice cookers, etc. directly on the floor, and use wooden boards or straw mats to avoid scalding the paint film.