Neb floor. Correct construction method and process of sports wood floor
Sports wood flooring is widely used in our daily life, so do you know the correct construction method and process of sports wood flooring? Please follow the sports wood floor editor to find out.
1. Check the quality of the panel before the sports wood floor equipment;
2. Lay the central floor one by one along the direction of the central keel. The surface and the planned elevation are located in the center. Nail steel nails every 400MM from the end and center, and smash them into the floor without damaging the floor, and the nail holes are flat and lubricated;
Sports wood floor structure
3. Lay other floors along the two ends of the central floor. During the laying process, the joints of adjacent floors are staggered. There should be a 3-5MM space between the floor and the floor. Do not hit it too tightly to avoid damage to the floor surface and angular;
4. When the floor needs to be blocked, the front side is down, the burr is not well located, and the block is smooth and regular;
5. The construction period of the sports wooden floor should be arranged compactly, pay attention to the changes, especially pay attention to the pollution and damage to the floor caused by water, steam pollution or safe foreign matter, oil, dust, flammable substances, etc. Unrelated personnel of the floor construction project shall not enter the construction site without permission, and strengthen the supervision of the construction site;
6. The skirting board equipment is fixed with steel nails into anti-corrosion wood bricks, the nail heads are smashed into the wood, and the nail holes are leveled;
7. The skirting boards are arranged reasonably, and the joints of the exhaust holes are uniform. The joints of the skirting boards at the corners of the buildings should be cut at a 45-degree angle, and the blocks should be straight, smooth, and the joints should be tight; sundries;
