Sports wood floor laying process should avoid these problems
There are many methods in the actual laying process of sports wood floors, mainly including empty laying, solid laying and floating laying. These three methods are suitable for different occasions, and which method to apply can be selected according to the actual situation. But no matter which method of laying is used, it must be pre-laid first, so as to ensure that the floor is sufficiently standard after it is laid, and in order to make the ground flat and even, it must be measured by drawing straight lines frequently, and measuring every 4 pieces on average once. Pay attention to the following points to prevent the problems that can be avoided when laying sports wood floors
Construction attention to detail one:
Fixing the wooden keel with iron nails: The fixing method of using wooden wedges and iron nails during construction will cause insufficient nail-holding force due to the too small contact surface between the wooden wedge and the iron nails, which will easily cause the wooden keel to become loose, which will cause damage when stepping on the floor. A sound occurs.
Construction attention to detail two:
The wooden keel is not treated with moisture-proof treatment: the non-drying keel made of pine plank is usually used for construction. It is fixed on the ground about 30 days in advance, and no moisture-proof layer is laid between the ground and the keel. When it comes to laying the floor, it is laid directly without checking the moisture content of the keel. In fact, the moisture content of the keel is usually about 25% at this time, while the moisture content of the qualified wooden floor is generally about 12%. If the humidity difference is too large, the wooden floor will absorb moisture quickly, causing the floor to arch and the paint surface to burst.
Construction attention to detail three:
The assembly is too loose or too tight: the expansion and contraction of the wooden floor changes with the change of the ambient temperature and humidity. Therefore, when formulating the wood floor paving plan, the tightness of the wood floor should be reasonably arranged according to the ambient temperature and humidity of the use site. If it is too loose, a larger gap will appear when the floor shrinks, and if it is too tight, the floor will arch when it expands.
Construction attention to detail four:
Cross-construction of decoration projects: first lay the wooden floor during construction, and then engage in other construction projects on the floor surface, which is the usual practice of the decoration team at present. In this way, after the floor is paved, it often takes a month or more to sand and paint. During this period, the floor is not isolated from the moisture and chemicals in the surrounding environment, which may cause the wooden floor to deform and crack due to the rapid change of moisture content. It is recommended that the factory do the paint.
There is also the fixation of the sports wooden floor when it is laid. There is a requirement that air nails or threaded nails should be used for fixing wherever it comes into contact with the keel, and the direction should be 60 degrees downward. For simple laying methods like these we just needFor a brief understanding, there will be a special person responsible for the overall installation during the actual laying, and European-style flooring will definitely provide you with the best service and best laying quality.
