The effect and precautions of sports wood floor paint layer on the floor
From the user's point of view, the sports wood floor should be considered in addition to the material, and the paint layer is a very important part of the quality of the wood floor. A good paint layer is like an almighty armor, so that a good sports wood floor has a longer service life. It is long and fully reflects its use value. Nowadays, in order to see through the wood texture, the sports wood flooring industry mainly uses clear paint. The clear paint is a clear paint, which shows the advantages of the wood color of the floor itself. High transparency is required, so that people can see the "true face" of the floor. Some floors on the market are made of thick water-mixing paint, and it is impossible to see whether the floor itself has insect eyes, scars, or even cracks. Consumers want Buy carefully to prevent confusion. During the purchase process, consumers can observe carefully: good paint coatings are full and uniform in color, clear in wood grain, smooth and smooth in surface, and uniform in brightness; poor paints look cloudy and dull.< /p>
Under normal circumstances, the areas where the sports wood floor moves frequently will grind sharp sharp tools and easily produce scratches, and pulley toys and sports equipment will also press marks. Therefore, to improve the use value of sports wood floors, it is necessary to improve wear resistance. The principle of wear resistance of sports wood floors is mainly the improvement of the paint layer process. The wear resistance of the same wood floor itself is not very different. The paint coating process and high wear-resistant UV coating technology can indeed improve the wood floor resistance The grinding performance is more than 10 times.
Changes in weather, seasonal floor heating, frequent use of wet mops and other phenomena will cause the floor to swell, shrink, and deform. Various accidental flooding events in life often cause irreparable damage to the floor. Ordinary paint The front floor is painted with paint on the front, and there is only a thin layer of spray paint on the back and the side of the floor. Observed with a magnifying glass, you can see that there are holes everywhere, which cannot prevent moisture from entering. Or when using geothermal, there will be a deviation of the local water content of the floor, which will cause the floor to arch and bend. Therefore, the floor must have good waterproof performance and must be sealed on six sides. Consumers can observe the floor carefully and see the tongue and groove. Whether the back panel and the back panel are completely lacquered, or are they only hung with simple lacquer decoration.
Paint sports wood floors, these problems cannot be ignored! After painting sports wood floor panels, various problems such as peeling paint, paint blisters, etc. can sometimes occur. Below we briefly introduce the reasons and solutions.
*, peeling paint
The reason is that the wood of the sports wood floor is rotten or the panel is not clean (with metal rust spots), or the quality of the paint is not up to standard. Small areas of paint peeling can be sanded with fine sandpaper first, thenPutty, re-priming and painting. For large areas, the paint must be hung up and reapplied.
Second, paint blistering
The reason is that there is moisture infiltration behind the paint layer of the sports wood floor, or the wood grain of the sports wood floor is cracked, and there is air in it. If there is moisture, remove the blistered paint with a hot air gun, allow the wood to dry, and repaint. If there is air, scrape off the blistered paint layer, fill the cracks with resin, and re-prime and paint.
Third, lose its luster
The reason is that the sports wood floor is not primed, or the primer is directly painted before the primer is dry, and the result is that the paint is absorbed by the wood and loses its luster. Or the quality of the paint is not good. The method is to use wet and dry sandpaper to grind off the old paint, brush off the sanding dust, wipe the surface with a clean damp cloth, and then repaint the top paint after it is dry.
Fourth, the paint surface is rough
The reason is that the paint brush used is not clean, the paint is old paint, or the paint surface is rough due to the pollution of the surrounding environment. If using old paint, be sure to filter it with paint filter paper or clean nylon stockings. Also, the paint bucket and paint brush must be clean before painting.
Fifth, the paint does not dry
The reason is that the indoor ventilation is not good, the temperature is too low, or the painted surface of the sports wood floor is greasy. Method Open the doors and windows for ventilation, and use a heater to increase the room temperature. If the surface is greasy, you can use a chemical paint remover or heat to remove the paint, wipe the surface thoroughly, and then repaint.
From the above, paint sports wood floors, three points of quality, seven points of craftsmanship. Therefore, finding a professional team with superb construction technology is a key to ensuring the smooth completion of the construction. NB sports wood floor consultation hotline 13718418469
