Introduction to Maple Sports Flooring for Gymnasium/Basketball Hall Single-story Gymnasium
Manufacturer's hotline: 13718418469/13811196760 Li Yong
The sports wood floor with single-layer keel structure is mainly used for fitness and general indoor sports activities. Its main performance indicators, impact absorption rate and standard vertical deformation, only require ≥35% and ≥1.0mm, and are only suitable for the site area. In the small and medium-sized gymnasium of 600~800 square meters, there are basically no facilities such as spectator stands, which can be used for general training and entertainment competitions. This structure is suitable for comprehensive fitness places in primary and secondary schools, communities, and industrial enterprises with small construction scale, low investment and relatively stable frequency of use.
(1) Simple single-layer sports wood floor: refers to the sports wood floor directly bonded to the cement floor or the hard surface after leveling treatment. This method is low in cost and its performance index cannot meet the requirements of the sports wood floor for competition. , At present, the use of this floor in gymnasiums is not recommended.
(2) Single-layer keel sports wood floor: The sports wood floor with single-layer keel structure generally has no hair floor layer and moisture-proof layer, and whether to install elastic rubber pads at the joint with the base of the building structure is determined according to the specific project cost. This kind of structure is relatively economical, and the performance index of its structure is also poor.
Sports wood floor is a kind of material used for indoor and outdoor floor decoration or special functions. It is mainly supported by wood, wood-based panels or bamboo as raw materials and other composite materials. Commonly used wood floor materials mainly include wood materials, fabric carpet materials, composite materials and polymer materials.
Sports wooden floor refers to the special wooden floor specially used for competition, training, teaching and fitness in the gymnasium (including basketball, volleyball, etc.), and is an important part of the gymnasium facilities.
Sports wood floors are generally composed of a variety of materials, and the production, manufacturing, installation and construction techniques are relatively high. Therefore, considering the cost and the level and use of the gymnasium, it is divided into sports wood floors for competition, training, teaching and fitness, and is based on the impact absorption rate. , Standard vertical deformation, relative vertical deformation, rolling load, ball rebound rate and sliding friction coefficient six performance index standards.
Structure of wooden floor for gymnasium
The structure of the wooden floor of the gymnasium is mainly composed of the surface floor, the raw floor layer (the load is not divided into layers), the keel layer, the moisture-proof layer and the elastic pad. The use, performance index requirements, cost and materials of each structural layer are different for sports wood floors:
①Surface floor: refers to the outer floor used for sports wood floor*, which is the contact layer between athletes and the floor in the application of sports wood floor.
②The raw floor layer: refers to the layer that is close to the lower part of the surface floor and plays the role of leveling, increasing the strength and dispersing the load.
③ Keel layer: refers to the support frame installed under the surface floor or under the rough floor.
④Moisture-proof layer: refers to the isolation or moisture-proof material placed between the surface floor and the raw floor layer or the keel layer and the base layer of the building structure (cement floor).
Manufacturer's hotline: 13718418469/13811196760 Li Yong
Introduction of maple sports floor for gymnasium/basketball hall single-story structure gymnasium
