In the process of using the sports wooden floor of the gymnasium, human factors, equipment, environment, etc. will cause different degrees of damage to the wooden floor. How to deal with these different degrees of damage is the core of the maintenance of the sports wooden floor.
The paint surface of the sports wood floor is dull, dull, and slippery; the paint surface has damage, scratches, and shallow imprints; Problems such as mold, arching, and floor collapse occur more or less in stadiums. Some need cleaning, some need renovation, and some need to be re-installed.
1. The paint surface is dull and dull
Use the special cleaner for sports wooden floors in the gymnasium and professional felt pads to clean the entire venue with a polishing machine. After thorough cleaning, use a professional applicator to apply anti-slip glazing agent. After completion, the gloss, brightness and anti-skid performance of the paint film can be fully restored. Ps: Sports wooden floors cannot be waxed (sports wooden floors have strict requirements on the friction coefficient of the floor surface. If the floor surface is too smooth, the athletes will easily cause the soles of the feet to slip due to the reduction of the friction coefficient during the exercise process, which will affect the normal competition level. play, and a slip accident may occur in severe cases).
2. Paint damage, scratches, shallow imprints
The paint film of the venues that have been installed for more than 2 years is partially peeled off, severely worn, with paint scratches, cigarette butts burns and other paint damage.
Use black sand mesh and polishing machine to polish the entire site, throw away the surface of the paint film, and partially polish the scratches and cigarette butts (if the scratches or burns deeply damage the wood layer, this treatment plan cannot be completely repaired) , then apply a top coat all over the field and re-scribing. After completion, the paint surface can be restored to the brightness and anti-skid performance of the new paint, and the integrity of the paint film is good.
3. The paint surface is peeled off, the panel layer is damaged, and the tile is slightly changed
For venues that have been paved for 3 to 5 years, it is necessary to change the line drawing, the color paint scheme, and the tile change of the panel. Burn holes.
Use coarse, medium and fine sandpaper to thoroughly polish the sports wooden floor of the gymnasium, remove the old paint layer, and use putty to repair the groove marks, holes, missing corners and other board surface scars. Sand until a new layer of wood is exposed, then buff, and repaint the lines four times on both sides according to the standard procedure. In cooperation with the local floor replacement project, the traces of use of the floor will be completely eliminated after the whole site is completed, which can be completely comparable to the newly installed floor.
4. Holes, cracks, and burning of a single panel
There are burn holes with a depth of more than 2mm, impact holes, cracked boards and other panel damages on the sports wooden floor panels of the gymnasium, or the grounds with severe tile deformation but the bottom structure are intact. Replacement of wood floor panels.
Remove the panel in the damaged area of the panel, then install a new panel, apply coarse, medium and fine sand to the newly installed panel areaThe paper is sanded, then polished, and then painted four times on both sides of the Polo according to standard procedures. After completion, the panel damage and tile change in this area can be completely eliminated.
5. Flooding and moldy, arching, floor collapse
The sports wooden floor of the gymnasium is damaged due to water immersion, termite bites, and overloading of the floor, and the overall structure of the floor is damaged, and the structure and functionality of the floor are damaged. Partially reworked wooden floors.
Completely remove floors in areas of structural damage and resurface with materials consistent with the original system structure, or with similar structural materials, but ensure that the panel finish is the same height as the original floor. The newly installed floor area is then sanded with coarse, medium and fine sandpaper, then polished, and then painted four times on both sides according to the standard process. Once completed, any damage to the wood floors in the area will be completely eliminated. For the floor damaged by termites, it is necessary to hire a professional anti-termite company to deal with it, otherwise the service life of the newly replaced wooden floor cannot be guaranteed.
