How to solve the problem of sports wood floor warping, we must first know what causes it. Our company has been committed to the sports wood floor industry for a long time. The following is an analysis of the reasons for the super edge of the sports wood floor:
1. Our cleaning staff did not remove the water stains in time when cleaning the wooden floor, which caused the wooden floor to warp. If the water is too much for a long time, it will cause the sports wooden floor to bulge and deform. So ask our cleaning staff to clean with a non-drip mop.
2. The air temperature changes greatly due to regional environmental factors, which leads to the increase or decrease of the moisture content of the wooden floor surface, which leads to the shrinkage of the section and the deformation.
3. The gap reserved for sports wood floor is too small during construction. When the air temperature in the sports wood floor structure is high and cannot be eliminated in time, the increase in moisture content causes the expansion of the multi-layer board, which leads to the warping of the wood floor surface.
4. The indoor air temperature is high and the moisture content increases. The reserved expansion joints during the installation of the sports wood floor will be glued together. If the ventilation is not carried out in time, it will be deformed.
